Wideband bandpass-to-all-stop reconfigurable filtering power divider with bandwidth control and all-passband isolation

A novel wideband bandpass-to-all-stop reconfigurable filtering power divider is proposed in this study, which allows for four-order bandpass-to-all-stop reconfigurable operating function and equal power division. Its circuit configuration includes the cascaded coupled-line sections with tight coupling to extend the impedance transforming. Furthermore, with the introduction of the half-wavelength open-circuit stubs, which controls the bandwidth, extra transmission poles located at the cut-off frequency are generated, thus resulting in high frequency selectivity. Moreover, by using a single resistor between input coupled-lines, the high all-passband isolation can be achieved. The grounding are then loaded to the output coupled-lines to enable bandpass-to-all-stop operating functionality. For demonstration, a prototype operating at 2 GHz is designed, simulated, and measured with a 15 dB bandwidth of 51%, 19 dB stopband rejection up to 5 GHz, and 14.5 dB all-passband isolation, which shows a good agreement between the simulated and measured results

A Broadband Graphene-Based THz Coupler with Wide-Range Tunable Power-Dividing Ratios

A wide-band coupler based on the graphene with inherent DC-block function and adjustable power-dividing ratios is proposed. This coupler uses three sections of the two-line coupled lines, four sections of the three-line coupled lines, and four graphene stubs (two U-shaped stubs and two rectangular stubs). The graphene stubs allow the coupler to own dynamic surface conductivity, which could be tuned by altering the chemical potentials. The tunable power-dividing ratios could be achieved by varying the chemical potentials applied to the U-shaped graphene stubs and the rectangular graphene elements, respectively. In addition, the widths of two-line coupled lines in the proposed coupler are analyzed to affect the power-dividing ratios in detail. Finally, the power-dividing ratios of the proposed coupler have a variation range from 5.4 to 9.56 dB at 1.75 THz with a flat 90° phase shift. The minimum −10 dB impedance bandwidth is 44 % from 1.47 to 2.3 THz, thus indicating a wide-band performance

Wideband Filtering Power Divider With Ultra-Wideband Harmonic Suppression and Isolation

In this paper, a wideband filtering power divider (PD) with ultra-wideband harmonic suppression and isolation is proposed. The dual coupled-line sections are embedded to the conventional quarter-wavelength transmission lines, which helps to extend the passband of the PD. With the introduction of the short-circuit stubs shunted at the output ports and the coupled lines with the open-circuit stubs, the ultra-wide stopband can be implemented more efficiently, thus resulting in five transmission zeros from 2 to 6 GHz. Furthermore, the improved isolation structure with series connected a resistor and a capacitor can be utilized to realize the ultra-wide isolation frequency band. Using a single resistor between two output ports, we have achieved an excellent in-band isolation. For demonstration, a wideband filtering PD operating at 1 GHz with a 20-dB bandwidth of 50% and an ultra-wide stopband better than 20 dB from 2 to 6 GHz is designed, fabricated, and measured. The measured results agree well with the anticipation

Dual-Band Dual-Mode Substrate Integrated Waveguide Filters with Independently Reconfigurable TE101 Resonant Mode

A novel perturbation approach using additional metalized via-holes for implementation of the dual-band or wide-band dual-mode substrate integrated waveguide (SIW) filters is proposed in this paper. The independent perturbation on the first resonant mode TE101 can be constructed by applying the proposed perturbation approach, whereas the second resonant mode TE102 is not affected. Thus, new kinds of dual-band or wide-band dual-mode SIW filters with a fixed or an independently reconfigurable low-frequency band have been directly achieved. In order to experimentally verify the proposed design method, four two-cavity dual-band SIW filters, which have different numbers of perturbation via-holes in each cavity, and a two-cavity dual-band SIW filter, which includes four via-holes and eight reconfigurable states in each cavity, are designed and experimentally assessed. The measured results indicate that the available frequency-ratio range from 1 to 1.3 can be realized by using four two-cavity dual-band SIW filters. The center frequency of the first band can be tuned from 4.61 GHz to 5.24 GHz, whereas the center frequency of the second one is fixed at around 6.18 GHz for the two-cavity dual-band SIW filter with four reconfigurable states via-holes. All the simulated and measured results show an acceptable agreement with the predicted data

Graphene-based Yagi-Uda antenna with reconfigurable radiation patterns

This paper presents a radiation pattern reconfigurable Yagi-Uda antenna based on graphene operating at terahertz frequencies. The antenna can be reconfigured to change the main beam pattern into two or four different radiation directions. The proposed antenna consists of a driven dipole radiation conductor, parasitic strips and embedded graphene. The hybrid graphene-metal implementation enables the antenna to have dynamic surface conductivity, which can be tuned by changing the chemical potentials. Therefore, the main beam direction, the resonance frequency, and the front-to-back ratio of the proposed antenna can be controlled by tuning the chemical potentials of the graphene embedded in different positions. The proposed two-beam reconfigurable Yagi-Uda antenna can achieve excellent unidirectional symmetrical radiation pattern with the front-to-back ratio of 11.9 dB and the10-dB impedance bandwidth of 15%. The different radiation directivity of the two-beam reconfigurable antenna can be achieved by controlling the chemical potentials of the graphene embedded in the parasitic stubs. The achievable peak gain of the proposed two-beam reconfigurable antenna is about 7.8 dB. Furthermore, we propose a four-beam reconfigurable Yagi-Uda antenna, which has stable reflection-coefficient performance although four main beams in reconfigurable cases point to four totally different directions. The corresponding peak gain, front-to-back ratio, and 10-dB impedance bandwidth of the four-beam reconfigurable antenna are about 6.4 dB, 12 dB, and 10%, respectively. Therefore, this novel design method of reconfigurable antennas is extremely promising for beam-scanning in terahertz and mid-infrared plasmonic devices and systems

Arbitrary Multi-way Parallel Mathematical Operations Based on Planar Discrete Metamaterials

Multi-way parallel mathematical operations along arbitrary transmission paths are constructed based on realizable planar discrete metamaterials in this paper. The introduced method of “computational metamaterials” is used to perform the desired mathematical operations. For producing high-efficiency devices, the function of multi-way parallel mathematical operations is indispensable in advanced analog computers. Therefore, in this paper, we propose the arbitrary transmission paths that can be implemented by the bending of the electromagnetic waves based on the finite embedded coordinate transformations, which has a strong potential to realize the function of multi-way parallel computation. Nevertheless, owing to the inherent inhomogeneous property, metamaterials are difficult to be achieved in nature currently. In order to make it possible for fabricating in practical applications, the planar discrete metamaterial is a promising medium due to its homogeneous property. Numerical simulations validate the novel and effective design method for parallel optical computation

Single-conductor co-planar quasi-symmetry unequal power divider based on spoof surface plasmon polaritons of bow-tie cells

In this paper, the spoof surface plasmon polaritons (SSPPs) transmission line (TL) of periodical grooved bow-tie cells is proposed. The complex propagation constant and characteristic impedance of the SSPPs TLs and microstrip lines (MLs) are extracted using the analytical method of generalized lossy TL theory. The properties of the SSPPs TLs with different substrates and the same geometrical configuration are experimented. Then, for comparison, two ML counterparts are also experimented, which shows that the SSPPs TL is less sensitive to the thickness, dielectric constant and loss tangent of the chosen substrate below the cutoff frequency, compared with the ML ones. The single-conductor co-planar quasi-symmetry unequal power divider based on this SSPPs TL is presented in microwave frequencies. For experimental validation, the 0-dB, 2-dB, and 5-dB power dividers are designed, fabricated, and measured. Both simulated and measured results verify that the unequal power divider is a flexible option, which offers massive advantages including single-conductor co-planar quasi-symmetry structures, wide-band operation, and convenient implementations of different power-dividing ratios. Hence, it can be expected that the proposed unequal power dividers will inspire further researches on SSPPs for future design of novel planar passive and active microwave components, circuits and systems

A Novel Compact Planar Phase Shifter with a Microstrip Radial Stub

Abstract: This paper presents a novel compact phase shifter with simple planar structure. The configuration consists of a microstrip line and a microstrip radial stub to implement wide-band phase shifting functions. Changing the length of the microstrip line and the angle of the radial stub, arbitrary phase differences can be obtained. For demonstration purpose, a 45° and 90° phase shifter are designed, fabricated and measured. The good agreements verify our proposed structure and design method